Trenchless technology provides an environmental and cost-effective solution to your underground project.
EPS Trenchless Installations advocates this revolutionary approach, offering a range of innovative solutions that remove the need for disruptive excavations. By leveraging state-of-the-art techniques such as Moling and Directional Drilling, EPS Trenchless Installations delivers efficient and cost-effective alternatives for laying and repairing underground utilities.
Impact Moling is a way of installing new pipes, cables and ducts under the ground without the need to dig continuous trenches. Instead, pits are dug at intervals in the ground and the mole is lowered inside.
The mole then tunnels through the earth, from the first pit through to the destination pit leaving a clear narrow tunnel large enough for the required utility to be pulled through.
The mole in reality is a steel pneumatic cylinder, with compressed air that hammers through the soil creating a bore hole for the new pipe to be laid. This massively reduces installation time, disturbance to the surface and the cost.
Originally designed for installing small-diameter pipes, Moling excels in navigating through compressible soils over short distances. Our Moling services effortlessly replace damaged or old pipes or install new lines, electric cables, gas pipes and ducting.
Moling is used for;
Moling is employable in a range of locations. It is an incredibly versatile and non-invasive method for use in environmentally sensitive areas such as SSSIs, and under roads, existing structures, congested areas, railways, waterways, and much more.
INSTALLATION RATES
dependent on the required diameter and the ground conditions
distances
(perfect ground conditions required)
ACCURACY
ground dependent
Our impact moling services are a cost-effective and environmentally friendly solution for many underground installation projects. Instead of digging trenches to lay pipes, ducts, and cables, EPS Trenchless Installations apply a technique called moling.
Select your installation type and pinpoint your exact start and end locations on our interactive map to get started!
Colchester is a located in Essex, with a mix of modern and historic architecture. It offers a wide range of cultural and leisure activities, such as theatres, parks, and a zoo. It is also home to the University of Essex. Colchester is well-connected, with good road and rail links to London and other parts of the UK. The town is served by the Colchester railway station, which provides direct train services to London Liverpool Street, making it a popular commuter town.
Colchester is home to a busy retail sector, with many independent shops and large retail chains. The town centre features high-street stores, as well as boutique shops, markets, and shopping centres. Retail is boosted by Colchester’s role as a regional shopping hub for surrounding towns and villages, attracting visitors from all over Essex. Colchester has become a growing centre for the tech and digital industries. The University of Essex has played a significant role in fostering innovation, providing skilled graduates, and supporting tech startups through initiatives like its Innovation Centre.
While manufacturing is not as dominant in Colchester as it once was, the town still has a significant number of businesses in the sector. This includes companies involved in construction materials, food production, engineering, and light manufacturing. Colchester has a variety of industrial estates and business parks, such as St. Mary’s Industrial Estate and Colchester Business Park, which are home to manufacturing and logistics companies. With its rich history, Colchester is a popular tourist destination, and the tourism sector plays a key role in the local economy. Attractions such as Colchester Castle, Colchester Zoo, and Castle Park draw visitors from across the country. The hospitality industry is also strong, with a variety of hotels, restaurants, and cafes that cater to both tourists and local residents. Many businesses also benefit from being near London and the surrounding areas, serving as a destination for day-trippers or short breaks.
Colchester has a significant presence in the health and social care sectors. The Colchester Hospital University NHS Foundation Trust provides a wide range of medical services to the region and is a major employer. In addition to healthcare services, Colchester is home to several private healthcare businesses, care homes, and wellness centers.
Colchester is experiencing growth in residential and commercial property development. The town’s relatively affordable property prices compared to London make it an attractive location for commuters, leading to significant housing development projects. The local construction industry is supported by ongoing infrastructure improvements, such as new housing estates, schools, and commercial developments, including the ongoing Northern Gateway regeneration project. Due to Colchester’s strategic location near major road networks, such as the A12, and its proximity to the Port of Harwich, the town is well-positioned for logistics and distribution businesses. Warehouses, distribution centres, and transport companies contribute significantly to the local economy. Several logistics companies use Colchester as a base to serve the wider East Anglia region.
Moling and Directional drilling in Colchester, is influenced by the local ground conditions, which can affect the feasibility, cost, and technique of drilling operations. The ground conditions in Colchester can vary depending on the specific location within the town, but there are several general factors to consider when assessing the suitability of the area for directional drilling. In Colchester, many areas are underlain by clays, sands, and gravels, which can vary in depth. These types of soils are often found in river valleys and can affect the ease of drilling. Clay-rich soils may present challenges due to their potential to swell when wet or collapse when disturbed.
Like much of Essex, Colchester sits on glacial deposits, which include a mix of silts, sands, and gravels. These materials can offer relatively stable conditions for directional drilling, but the nature of these deposits can vary significantly from one location to another, which may influence drill ability. In some areas of Colchester, the ground is underlain by harder materials such as chalk, limestone, or sandstone. These harder rock layers can require more powerful equipment and could increase the cost of drilling. Colchester has areas that are prone to high groundwater levels, particularly near rivers or low-lying areas. The presence of groundwater can impact the stability of boreholes and require specialized equipment to manage water ingress during drilling operations. Proper planning is required to ensure that the water table doesn’t pose a significant issue for drilling.
Colchester, as a town with both historic and modern infrastructure, presents unique challenges for directional drilling in urban areas. Drilling in populated areas near buildings, roads, utilities, and other infrastructure can complicate the process. For instance, it may be necessary to avoid underground utilities, such as water, gas, and electricity lines, which requires careful planning and survey work. In urban areas, directional drilling may be preferred to avoid disturbing surface-level infrastructure. However, the depth and condition of the ground in such areas must be assessed to ensure that the drilling can be done without damaging existing structures or utilities. The depth of directional drilling required in Colchester depends on the specific project, whether it’s for utility installation, geotechnical investigations, or other purposes. Ground conditions will vary with depth, so it’s important to conduct a thorough survey of the area to understand the challenges at the target depth. Shallow drilling may encounter less challenging soil conditions, while deeper drilling may require more specialized equipment due to harder materials such as bedrock.
EPS provide underground utility installation that is fast, efficient and environmentally friendly.
Using Moling and Directional Drilling technology, our streamlined process requires minimal space which avoids unnecessary disruption and inconvenience.
There is no need for extensive surface cutting or digging long trenches. ‘No-dig’ techniques are very adaptable to various soil conditions and protected locations.
This technique provides accurate utility installation, which also protects wildlife and any ecologically sensitive locations. It is an incredibly cost-effective method of replacing old utility systems or installing new utilities.
Skip to content
